In the use of the process, first of all, we must look at the volume size of the freezer, and then according to the situation, put the meat inside for refrigeration and freezing, in the operation, but also to consider the impact of external factors, if it is the winter, the temperature is relatively high, if it is declining, the temperature naturally should be adjusted to lower, or it will be a botch. If the winter temperature is adjusted very low, the outside world is relatively cold, it is easy to freeze the meat very hard, it is not convenient to take out. If it is down, the temperature is adjusted very high, it can not achieve the freezing effect, easy to be meat spoilage.

Of course, in addition to these, to consider the use of freezer voltage and power supply, generally do not share a socket with other electrical appliances, which is easy to produce voltage instability to burn the compressor. The power supply under normal circumstances, generally do not share a socket with other appliances, which is prone to voltage instability, so as to burn the compressor. The power supply under normal circumstances should be 220 volts, 50 hertz single-phase AC power. For other high power freezers, you should choose the appropriate voltage and power settings according to the manual. For the safety period, of course, there should also be a grounding wire, because in the working process, the internal parts of the freezer rub against each other and easily generate static electricity. All, to do the appropriate safety measures.

Notes on the use of island cabinets

1, the transportation of the island cabinet should be placed more than two hours before power, power two hours before putting food. Into the island cabinet cabinet food should be placed evenly, and should leave a cold air circulation gap.

2, island cabinet if not used for a long time, should cut off the power supply, keep the cabinet clean and dry.

3, should always pay attention to the operation of the equipment, such as the discovery of abnormalities in a timely manner to check, major problems should be asked to professionals for overhaul, and in a timely manner with the business maintenance department contact.

4, island cabinet power supply must be dedicated line power supply, socket reliable grounding. Power supply voltage fluctuations, should be installed more than 5 times the power of the machine regulator.

5, the island cabinet condenser should be cleaned every three months, cleaning should cut off the power supply, and then blowing with compressed air rushing, when the condenser surface is more dusty, to use water to flush thoroughly, with water to flush with water to avoid wetting other electrical components.